Toilet Repair & Installation in Milwaukie, Oregon
A running toilet quietly wastes water, a weak-flushing one drives you crazy, and a leaking one can stain the ceiling below. We handle all of it across Milwaukie — from rebuilding the tank guts on a classic toilet to swapping a clog-prone first-gen low-flush for a modern one that actually works on the first try.
Toilet Work We Do
Running Toilets
New flappers, fill valves, and flush assemblies to stop the constant refill and the wasted water.
Weak Flushes
Fixing partial flushes and clearing mineral-clogged rim jets, or replacing a poor-performing toilet.
Base Leaks & Wax Rings
Pulling and resetting the toilet with a new wax ring — and a new flange when the old one has corroded.
Rocking Toilets
Resetting loose toilets solid so they stop moving and stop breaking the seal underneath.
New Toilet Installs
High-efficiency toilets that flush strong on less water — installed level, sealed, and leak-free.
Supply & Shutoff
New supply lines and shutoff valves so the toilet fills quietly and shuts off when you need it to.
Signs Your Toilet Needs Attention
- Water constantly running or the tank refilling on its own
- A weak flush, or one that needs a second flush to clear
- Water seeping around the base or the toilet feels loose
- A stain on the ceiling below an upstairs bathroom
- The toilet rocks when you sit or shift on it
- A wobbly, corroded shutoff valve behind the toilet
Old Toilets, First-Gen Low-Flush, and Upstairs Leaks
Milwaukie's historic homes have seen a lot of toilets come and go, and two problems show up again and again. First, the early 1.6-gallon low-flush models from the 1990s — many of them simply never flushed well, so homeowners double-flush and still fight clogs; a modern high-efficiency toilet solves that outright. Second, in the town's many two-story homes, a failing wax ring on an upstairs toilet leaks a little with every flush and shows up as a brown ring on the ceiling below. Both are straightforward for us to fix — and the ceiling one is worth handling quickly before the water damage spreads.
- Tank rebuilds that stop the running and the waste for years
- Wax ring and flange replacement done right so it doesn't recur
- Modern high-efficiency toilets that flush strong on less water
- We reset every toilet solid and leak-test before we leave
Milwaukie Areas We Serve
Frequently Asked Questions
My toilet runs constantly — big deal?
Yes — it can waste hundreds of gallons a day. It's almost always a worn flapper, bad fill valve, or misadjusted chain. Milwaukie's well water scales the flapper and valve seat, so a tank rebuild usually fixes it for years.
Fix or replace an old low-flush?
Some first-gen 1.6-gallon toilets never flushed well by design — a modern high-efficiency model ends the double-flushing and clogs. An otherwise-good toilet with a running or leaking issue is cheaper to repair.
Ceiling stain under the upstairs bath?
Classic failed wax ring — the toilet-to-flange seal leaks a little each flush and shows below. We pull the toilet, replace the wax ring (and flange if corroded), and reset it so it stops.
Why does my toilet rock?
Loose closet bolts or a deteriorating/low flange — and every rock breaks the wax seal more. We reset it solid to protect the seal underneath.
Milwaukie services: Faucet Repair → | Shower Valve Repair → | Drain Cleaning → | Toilet Repair Tualatin →
Toilet Trouble in Milwaukie?
Running, weak, or leaking — we'll fix it or install a better one. Call or schedule online.