Toilet Repair & Replacement in King City, Oregon
A running toilet, rocking base, or one that won't flush properly is a quick fix when it's a flapper or fill valve — but a toilet that's been in service since the 1960s and uses 3.5 gallons per flush is a candidate for full replacement. True Flow Plumbing handles both in King City.
Toilet Service in King City
King City's housing stock from the 1960s and 1970s has toilets that range from original high-flow units that have never been replaced to more recent upgrades from the 1990s. The most common call we get from King City is a running toilet — a worn flapper or fill valve after 30–50 years of service. The second most common is a full comfort height toilet replacement, especially in King City's retirement community context where accessibility matters. We carry fill valves, flappers, wax rings, and comfort height units on the truck.
🚽 Running Toilet Repair
Fill valve and flapper replacement — the fix for most running toilets. Done in under an hour.
🔧 Flush Valve Replacement
When the flush valve seat is damaged, we replace the whole assembly — not just the flapper.
🏠 Full Toilet Replacement
Remove old unit, install new — wax ring, supply line, shutoff valve, haul-away included.
♿ Comfort Height Upgrades
17–19 inch comfort height models — a common and meaningful upgrade in King City.
🔩 Wax Ring Replacement
Rocking toilet or leak at the base — failed wax ring reseated before it damages the subfloor.
🐌 Weak Flush Diagnosis
Mineral-clogged rim jets or low tank level cleared without replacing the toilet unless needed.
Common Toilet Problems in King City
- Runs continuously or cycles on and off — worn flapper or fill valve
- Rocks or feels unstable — failed wax ring
- Water on the floor after flushing — wax ring failure
- Requires two flushes — weak flush from clogged rim jets
- High-flow unit using 3.5+ gallons per flush — replacement candidate
- Handle must be held down — flapper chain issue
King City Neighborhoods We Serve
Frequently Asked Questions
Why is my King City toilet constantly running?
Almost always a worn flapper or failing fill valve — the most common issue in King City's older homes where original tank components have been in service for 30–50 years without replacement. A running toilet wastes 200 gallons per day. The repair is quick and inexpensive.
Can you install a comfort height toilet in a King City condo?
Yes. Comfort height models at 17–19 inches are a popular upgrade in King City's retirement community — significantly easier to use than standard 15-inch toilets. We handle full replacement including wax ring, supply line, and haul-away of the old unit.
Should I repair or replace my King City toilet?
If it's under 15 years old and in good shape, a cartridge or flapper repair makes sense. If it's original 1960s–1970s high-flow hardware using 3.5–5 gallons per flush, replacement with a 1.28 gpf model is a water savings and reliability improvement worth making.
Also see: Faucet Repair King City → | Shower Valve King City → | Drain Cleaning King City →
Toilet Problem in King City?
Most repairs done same day. Call for a free quote on toilet repair or replacement.